POOL HEATER INSTALLATION •
Pool Heater Installation in
Empire Pools installs and replaces gas pool heaters and heat pumps for homeowners who want a longer, more reliable
swim season. We don’t just “swap the box” — we help you choose the right heater based on pool size, target temperature,
cover usage, and real-world backyard conditions (wind exposure, shade patterns, and colder nights can change what “enough heat”
actually means). We also look at your equipment pad and plumbing so the finished install is clean, service-friendly,
and easy to operate — with unions, shutoffs, and a layout that makes sense.
Because installs often vary by property, we walk you through the practical details up front: gas vs. heat pump,
warm-up expectations, operating cost considerations, and what needs to be coordinated with a licensed gas and/or electrical pro.
Whether your pad is near Hicksville Road, close to Jerusalem Avenue, along Stewart Avenue,
off Hempstead Turnpike, near Wantagh Parkway,
or a quick hop from Bethpage State Park or Plainview-Old Bethpage Community Park, we plan the job around access,
airflow clearances, and a neat final setup. The goal is simple: start your season earlier, stay warm later, and never have to guess which buttons to push.
What to Expect
Stay Warmer, Longer in
A properly-sized pool heater is more than just BTUs on a box. We look at your pool size, depth, wind exposure, cover usage,
and how you actually swim before recommending a heater. Our team explains gas heaters vs. heat pumps, reviews your
existing gas and electric setup, and helps you choose a model that fits your budget and goals. On install day we set the heater
on a solid base, re-plumb the pad with unions and bypass where appropriate, and work with your licensed gas and/or electrician
to finish connections. Once everything is live, we bleed air, fire the heater, verify flow and temperature rise, and show you
exactly how to use and protect your new heater through the season.
What’s Included
- On-site review of pool size, pad layout, wind exposure, and cover use.
- Discussion of gas heater vs. heat pump options and which makes sense for your property.
- Heater sizing recommendations based on pool volume, target temperature, and season length.
- Removal of old heater (if applicable) and preparation of a stable pad or base for the new unit.
- Clean, service-friendly plumbing with unions, shutoffs, and bypass where appropriate.
- Integration with your existing pump, filter, and, where applicable, automation or salt system.
- Startup and testing: purge air, verify proper flow, and confirm heater is firing and holding temp.
- Owner walk-through at the pad — modes, setpoints, basic troubleshooting, and protection tips.
- Labeling of key valves and controls so you’re not guessing after we leave.
-
Note: Gas line and electrical work are handled by a licensed professional. We can coordinate with your
contractor or recommend options. Pool heater installation is custom — call for pricing.
Why Choose Empire Pools
- Local experience sizing heaters for wind exposure, shaded yards, and Plainedge shoulder seasons.
- We look at the whole system — pump, filter, plumbing, gas, and electric — not just the heater box.
- Honest guidance on gas heater vs. heat pump so you understand pros, cons, and operating costs.
- Clean, organized equipment pads that future techs can actually work on without cutting everything apart.
- Integration with automation and salt systems to keep the heater protected and easy to control.
- Clear expectations on warm-up times so you know what your heater can realistically do.
- Goal: reliable heat with fewer surprises, so you’re using the pool instead of fighting cold water.
Call for pricing
What Heater Customers Say
★★★★★
“We’re near Hicksville Road and wanted early-season heat that actually holds. They sized it properly and explained what to expect on cool nights.” — D. Romano, Plainedge
★★★★★
“Super clean install—unions, shutoffs, and everything labeled. The pad looks organized and it’s easy to service.” — K. Sutherland, Plainedge
★★★★★
“They broke down gas vs heat pump in plain English and didn’t push anything. We picked what made sense for our swim schedule.” — M. DeLuca, Plainedge
★★★★★
“Coordination with our electrician was smooth, and the startup testing was thorough. We got a real walkthrough—no guessing.” — S. Patel, Plainedge
★★★★★
“Our equipment pad is tight off Jerusalem Avenue. They planned the layout so it’s actually serviceable now.” — L. Brennan, Plainedge
Pool Heater Installation — FAQs
How do you size a pool heater correctly for a Plainedge backyard?
We start with pool gallons and your target temperature, then factor in wind exposure, shade, and whether you use a cover.
In Plainedge, cooler spring nights and breezier shoulder-season days can increase heat loss—so we size for real-world performance, not just a chart.
What’s the difference between a gas pool heater and a heat pump?
A gas heater heats faster and is great for “heat on demand.” A heat pump heats more gradually and can be very efficient for maintaining
temperature if you keep the pool covered. We recommend based on your swim schedule, comfort goals, and operating cost expectations.
How long does it take to install a new pool heater?
Many installs can be completed in a day, but timing depends on the pad layout and whether we’re coordinating gas and/or electrical
connections with licensed pros. We’ll give you a clear plan and sequence before the job starts.
Do I need a bypass, unions, and shutoff valves for my heater?
Yes—this is what keeps the system serviceable and protects your investment. Unions prevent future pipe cutting, shutoffs make servicing safer,
and a bypass can help optimize flow and simplify troubleshooting.
How do I keep my heater running efficiently and avoid breakdowns?
Use a cover, keep water chemistry balanced, maintain proper flow/filtration, and avoid extreme setpoint swings.
We’ll show you simple best practices and “what to watch for” so your heater stays reliable.
