POOL EQUIPMENT UPGRADES • ,
Pool Equipment Upgrades in ,
Empire Pools upgrades outdated pool equipment in — from pumps, filters, and heaters
to salt systems, automation, and LED lighting. We design upgrades around your pool, your power bill, and how you
actually use the backyard in , so everything works together and stays easy to operate.
In , we commonly see equipment pads that are aging out after years of hard seasonal use — noisy single-speed pumps,
undersized or restrictive filters, and older heaters that struggle to keep up when you want consistent water temps. During your consult we
look at the full system (plumbing layout, return sizes, suction lines, valves, electrical feed, and gas line routing if you heat the pool)
so we can recommend upgrades that make sense as a complete package — not just “swap a part and hope.”
Because many homes in sit close to major corridors like Hempstead Turnpike (NY-24), Wantagh Ave,
and the Meadowbrook State Parkway, we can often schedule installs efficiently and keep your project moving. Neighborhoods around
Jerusalem Ave, Hicksville Rd, North Wantagh, Gardiners Ave, Division Ave, and nearby side streets frequently have side-yard pads and tighter equipment corners,
so we plan for clean, service-friendly layouts with unions, labeling, and valve access that makes future service fast and straightforward.
The goal is simple: a quieter, cleaner-running pool that’s easier to manage — with properly sized equipment, smarter controls, and a setup you can
understand at a glance. We’ll walk you through how to run your new system before we leave, and we’ll set your schedules/speeds so you’re not guessing
on day one.
What to Expect
Smarter, Quieter, More Efficient Pool Equipment
Old equipment wastes energy, runs loud, and makes your pool harder to own — and in , we see that pain show up fast
with heavy summer use and debris load from mature trees in established neighborhoods. On each upgrade consult we
evaluate your entire pad — pump, filter, heater, plumbing, and controls — then recommend the right path based on how you
actually run the pool (daily run time, heating habits, and bather load). We size upgrades correctly for your pool and plumbing
so you’re not stuck with an oversized pump, a restrictive filter, or a heater that short-cycles.
pads are often tucked along side yards and tight equipment corners, so we rework the layout for a clean, service-friendly
footprint with unions, valves, and labeling that make everything easy to understand. Many of our routes run right off
the main corridors like Hempstead Turnpike (NY-24) and nearby access via Wantagh State Parkway, so we can schedule upgrades
efficiently and keep your timeline tight.
Options commonly discussed include variable-speed pumps, larger cartridge or DE filters, modern gas heaters or heat pumps, salt
chlorine generators, automation controls, and LED lighting. We don’t just swap equipment — we build a system that works together,
test it, program run times, and show you exactly how to run your new setup before we leave.
What’s Included
- On-site review of your current pump, filter, heater, plumbing, and controls.
- Discussion of goals: lower electric bills, easier maintenance, better heat, or salt conversion.
- Recommendations for variable-speed pumps sized for your pool and filter.
- Options for upgraded filters (cartridge, DE, or sand) for better clarity and easier cleaning.
- Heater or heat pump upgrade paths for faster warm-up and improved efficiency.
- Salt system, UV, or automation controller recommendations where they make sense.
- Pad re-plumbing and layout cleanup so valves, unions, and equipment are easy to access.
- Programming of new equipment (timers, speeds, temperature, schedules) before we leave.
- Labeled valves and basic “how to run your new system” walk-through at the pad.
-
Note: Every upgrade package is custom. Pool Equipment Upgrades start at $699 + tax
and pricing scales based on the equipment you choose and how much re-plumbing is required.
Why Choose Empire Pools
- Decades of experience upgrading equipment pads — we know what holds up in local conditions.
- We design systems, not just swap single pieces — everything is sized to work together.
- Clear side-by-side options: repair existing vs. upgrade, with honest pros and cons.
- Experience with variable-speed pumps, salt systems, and automation for easier ownership.
- Clean, organized equipment pads — unions, labels, and neat plumbing runs.
- Upgrades planned around your yard: access, line layout, and how you entertain outside.
- Goal: a quieter, more efficient, easier-to-manage pool for the next decade, not just one season.
Starting at $699 + tax
What Upgrade Customers Say
★★★★★
“We’re in and they swapped our old pump for a variable-speed and cleaned up the whole pad. It’s drastically quieter.” — M. Donnelly,
★★★★★
“Filter upgrade was the best decision. They re-plumbed it clean with unions and labeled everything. Water clarity improved immediately.” — A. Ricci,
★★★★★
“Automation went in smooth. They programmed schedules, walked us through the app, and made sure we understood it before they left.” — S. Halpern,
★★★★★
“Heater replacement was clean and professional. They tested everything and the pad looks organized for once.” — J. Mastroianni,
★★★★★
“We did a salt upgrade and they explained exactly what to watch for. No guessing—just clear instructions and a setup that runs right.” — K. Nardi,
Pool Equipment Upgrades — FAQs
What’s the best first upgrade for most pools in ?
A properly sized variable-speed pump is usually the biggest “quality of life” upgrade — quieter operation, better circulation control,
and often lower operating costs. We match the pump to your pool volume and plumbing so it runs efficiently without stressing the system.
Do I need to upgrade my electrical or gas lines for new equipment?
Sometimes. In , older pads may have undersized electrical feeds or older gas routing that doesn’t meet the needs of a new heater.
We’ll identify what’s required during the consult and recommend the cleanest compliant path so the install is safe and reliable.
Can you upgrade my pad without redoing the whole plumbing system?
Yes. Most installs in are targeted upgrades. If the existing plumbing is safe and properly sized,
we keep what makes sense and only rework what’s needed for a clean, serviceable layout. If we find restrictions, leaks, or poor access,
we’ll show you exactly what’s wrong and why.
How do I know if my current pump is oversized or wasting power?
Common signs are loud operation, higher-than-normal filter PSI, short run times that still don’t keep water clear, and frequent backwashing/cleaning.
We check filter pressure, plumbing size, and your pool’s flow needs, then recommend a pump that matches the system instead of overpowering it.
Is it worth upgrading to a bigger cartridge filter?
In many cases, yes. A larger cartridge filter can mean better clarity, longer cycles between cleanings, and lower system restriction.
We size it based on your pool, debris load, and whether “less maintenance” is a priority for you.
Do you program the equipment and walk me through it after install?
Yes. We test the system, set schedules/speeds, verify heater and automation settings if included, and then do a quick pad walkthrough.
You’ll know what each control does, what to watch for, and how to run your new system confidently.
Can you combine upgrades—pump + filter + salt + automation?
Absolutely. Combining upgrades often creates the best result because the equipment is sized to work together. We’ll build a couple
clean “good / better / best” options so you can choose the package that fits your goals and budget.
