LINER REPLACEMENT •

Pool Liner Replacement in

Empire Pools installs premium vinyl liners for pools — precision measuring, sub-base touch-ups, bead-track inspection, and wrinkle-free vac set. We plan each replacement around everyday traffic corridors like Middle Country Road (Route 25), Route 112, Old Town Road, and Pine Road, plus neighborhood pockets near Coram Plaza, Longwood Estate Historic District, and the trail systems around Cathedral Pines County Park to reduce debris blowing into the pool during set and fill. Our techs document measurements, track condition, and cut-ins so your new liner fits tight and opens crystal clear.

Every liner job starts with detail work that most companies rush: we verify wall height, radiuses, hopper/deep-end geometry, and step/bench dimensions so the factory build matches your pool—not a “close enough” template. Before the liner goes in, we inspect the bead receiver, coping, and track for brittleness or gaps that can cause the liner to pop out later, and we flag anything that should be corrected while the pool is empty. On install day we prep the floor so it’s smooth underfoot (patching divots and low spots, addressing vermiculite or base wear where needed), then we use a controlled vac set and staged fill pace to pull the liner evenly into corners and seams. If conditions change—wind picks up, leaves start dropping, or access is tight—we adjust our staging (hose routes, equipment placement, debris control) so the liner stays clean during the most important part of the job: the first few inches of water and final alignment before cut-ins.

• Local Insight

Tuned for driveway access, staging, & Longwood-area tree debris

In backyards, liner installs often happen around heavy tree cover and windy days that can push leaves and grit into the pool. We stage vac lines, hoses, and debris control so the liner sets clean and stays aligned.

From homes near Middle Country Road (Route 25) and Route 112 to pockets off Old Town Road and Pine Road, we plan delivery, access, and hose routes to protect landscaping and speed the install.

What’s Included

  • On-site measure (length/width/depths), wall height, and corner radii verification.
  • Bead track inspection; replace brittle lock-in as needed (quoted on site).
  • Sub-base touch-ups: floor trowel/patch, divot and wrinkle prevention.
  • Liner hang and dual vac set for tight fit prior to filling.
  • Cut-ins after water passes threshold: main drains, returns, lights, and skimmer.
  • Hardware refresh (gaskets/faceplates/screws) as required by condition.
  • Haul-away of old liner (available; quoted by weight/condition).
  • Fill guidance to protect seams and prevent liner float; chemistry start-up.
  • Note: Structural repairs, wall foam, vermiculite/base rebuild, and plumbing repairs are quoted if observed.

Why Choose Empire Pools

  • expertise — manage access, staging, and weather swings during vac set.
  • Wrinkle-free process with staged fill, seam alignment, and photo documentation.
  • Transparent options: pattern choices, wall foam, step gaskets, and hardware refresh.
  • Coordination for water delivery or hydrant permits when required (town rules vary).
  • Clear scope & pricing before we begin — no surprises.
  • Post-install check-in to confirm fit, fill progress, and chemistry balance.
Starting at $2,800 + tax

Local Reviews

★★★★★

“They measured every detail and the new liner fit like a glove. Clean vac set and no wrinkles anywhere.” — T. Caruso,

★★★★★

“We were worried about debris blowing in during the install. They staged everything smart and kept it spotless.” — A. McKenna,

★★★★★

“They caught an issue with the bead track before hanging the liner and explained it clearly. That saved a future problem.” — J. Ferraro,

★★★★★

“Base was uneven from settling and they smoothed it out. The floor feels perfect and the seams look lined up.” — S. Patel,

★★★★★

“Great communication from quote to install day. They sent photos and walked us through the fill and cut-ins.” — M. Donnelly,

See more five-star reviews →

Liner Replacement — FAQs

Do you replace pool liners in ?
Yes. We handle liner replacement throughout and surrounding Suffolk/Nassau areas. The typical flow is: measurement visit → pattern/options confirmation → liner order → schedule the install window once it arrives.
How long does the liner replacement take on install day?
Most installs are completed in one day once the liner is on site. Fill time depends on your water source and pressure. We guide fill pace and seam alignment so the liner seats correctly before we complete cut-ins.
What should I do to prep for a liner replacement visit in ?
Clear a path for moving the liner and equipment, unlock gates, and remove loose furniture near the pool edge. If possible, send photos of the pool, steps/benches, and bead track ahead of time so we can plan staging and access.
Can you fix bead track or coping issues during the liner job?
Yes. We inspect the bead receiver/track during measurement and again once the old liner is out. If anything is cracked, loose, or worn, we quote the fix before proceeding so your new liner stays seated long-term.
What’s the most common reason a new liner ends up wrinkled?
It’s usually one of these: inaccurate measuring, rushing the vac set, an uneven base, or filling too fast before alignment is locked. Our process uses controlled vac set + base touch-ups + staged fill to prevent those issues.
Explore Liner Options 📞 Call for Liner Replacement Help