POWER VAC POOL SERVICE • ,
Power Vac Pool Service in ,
When your pool is green, cloudy, or loaded with debris, Empire Pools’ Power Vac service gives you a fast reset.
In , that often means leaf and grit buildup after coastal wind, fine silt that settles into corners,
and “dead spots” that keep re-clouding even after you shock — especially after
, , and .
We’re in and out of neighborhoods off , , and ,
so we know what pools here look like after storm cycles and heat spikes. We start with a quick safety and circulation check (water level, skimmers,
pump prime, filter pressure, and return flow), then choose the right cleanup method: vac-to-waste when debris and algae need to be physically removed
from the system, or vac through the filter when your setup can handle it without choking off flow. From there we brush walls, steps, and trouble areas
to break loose film, then run slow, controlled vacuum lanes to pull what’s on the floor without stirring the whole pool back up. You’ll get clear, practical
next steps (run-time, backwash/clean timing, and chemical guidance) so the pool continues improving over the next 24–72 hours instead of bouncing back to cloudy again.
What to Expect
Built for Heavy Cleanups in
Power Vac is designed for pools that are beyond a normal cleaning — thick leaves on the floor, algae blooms
after a late opening, pump or filter issues that left the water cloudy, or heavy debris after storms. We start by
checking circulation, equipment, and water level so we can safely vacuum to waste or through the filter depending
on your setup. Our techs brush and manually vacuum the floor and trouble spots, purge debris, and set up circulation
so filtration and chemicals can do their job after we leave. You’ll get clear notes on follow-up steps and whether
a second visit is recommended based on how your pool responds over the next 24–72 hours.
What’s Included
- Visual inspection of pool, equipment pad, and water level before we start.
- Manual floor and wall brushing to break up algae and debris.
- Power vacuuming to waste or through the filter (based on plumbing and condition).
- Leaf and debris removal from floor, corners, and common dead spots.
- Filter pressure check and basic backwash/rinse to restore flow where possible.
- Shock and chemical guidance based on pool volume and current readings.
- Circulation pattern review (returns aimed correctly, skimmers pulling well).
- Texted notes on what we did, what we recommend next, and what to watch for.
- Note: Power Vac focuses on cleanup, not equipment repair — pump, filter, or plumbing fixes are quoted separately if needed.
- Note: Severe “swamp” pools may require multiple visits — we’ll explain options and expected timelines clearly on site.
Why Choose Empire Pools for Power Vac
- 25+ years handling “swamp to blue” cleanups across Long Island.
- We understand -specific issues — leaf load, heavy pollen, and power outages after storms.
- Techs trained to watch filter pressure and flow so equipment isn’t abused during cleanup.
- Honest talk: we tell you if it’s a 1-visit cleanup or a 2–3 visit project before we start.
- Clear next-step plan so you’re not guessing what to do after we leave.
- Text reminders and status updates so you know when we’re on the way and when we’re done.
- Goal-based mindset: we aim for fast, safe turnaround — not endless “vacuum and hope” visits.
Call for pricing
What Power Vac Customers Say
★★★★★
“Our pool was a cloudy mess after a windy week. One Power Vac and it finally stopped re-clouding. They explained exactly what to do for the next 48 hours.” — D. Marino,
★★★★★
“After a storm near , we had leaves and grit everywhere. They vacuumed carefully, didn’t stir everything up, and the floor looked brand new.” — J. Caffrey,
★★★★★
“We’re right off and our pool went green fast after the pump lost prime. Empire got flow back, vacuumed to waste, and gave us a solid plan. Huge difference.” — S. Whitman,
★★★★★
“Off , we always get fine debris that sits on the bottom like sand. Their slow-lane vacuuming actually removed it instead of just clouding the water.” — R. Donnelly,
★★★★★
“They were honest from the start — told us it would improve over 24–72 hours, and that’s exactly what happened. Super professional and easy to work with.” — K. Heller,
Power Vac — FAQs
What’s the difference between Power Vac and a regular pool cleaning?
A regular cleaning is maintenance. Power Vac is a heavy cleanup meant to reset a pool that’s green, cloudy, or loaded with debris. It involves deeper brushing, controlled vacuum lanes, and choosing the right method (vac-to-waste vs through the filter) so debris is removed safely without wrecking circulation.
Do you vacuum to waste in ?
Yes, when it’s the smart move — especially for algae, silt, or heavy debris that shouldn’t be pushed into the filter. We’ll confirm plumbing setup, water level, and discharge location first. If vac-to-waste isn’t ideal for your system, we’ll use the safest alternative and explain why.
How fast will my pool look better after a Power Vac?
Most pools look noticeably better the same day, then continue clearing over the next 24–72 hours with filtration and proper chemistry. If the pool is a true “swamp,” it may take multiple visits — we’ll tell you that up front, not after you’ve already paid for one visit.
What do I need to do before you arrive?
Make sure we have yard access and the water level is high enough (mid-skimmer is ideal). If you can, empty skimmer baskets and remove big floating debris. If equipment has been off, don’t force it — we’ll check prime, pressure, and flow first so nothing gets damaged during cleanup.
Can you Power Vac if my filter is already clogged or my pump is weak?
Sometimes — but we’ll be straight with you. If flow is too low or pressure is unsafe, we’ll adjust the approach (often vac-to-waste) or recommend addressing the equipment issue first. Power Vac is meant to clean the pool, not destroy a struggling pump or filter in the process.
Will Power Vac fix algae permanently?
Power Vac removes the debris and a lot of what algae feeds on, but algae stays gone when chemistry and filtration stay consistent. We’ll give you specific next steps (run-time, backwash/clean timing, and shock guidance) so the pool keeps improving instead of bouncing back.
How is pricing determined for a Power Vac?
Pricing is based on pool size/depth, debris load, algae level, access, and whether we’re vac-to-waste or through the filter. We’ll look at the pool and give you clear pricing before we start. If we believe it needs 2–3 visits, we’ll say that up front so you can decide intelligently.
